Description
The ModWing is a standalone piece of concealment-enhancing hardware. It allows a user’s belt to apply additional leverage by rotating the holster and the grip of the gun towards the user’s body, creating better concealment and less user “printing” of the firearm and holster. This is the standard model. Interchangeable inserts allow the user to choose a strong or mild rotation, based on the user’s attire. The aggressive texture molded into the insert face increases the stability of the ModWing, in turn, the firearm and holster.
Each ModWing kit comes complete with a Spine, 2 Interchangeable Riser Inserts, and Assembly Hardware. Due to the inserts being interchangeable, and the reversible spine, the ModWing is ambidextrous and can be configured for RH or LH carry. You’ll also receive two rubber spacers, two threaded posts, and two flat head screws.
You must have two retention holes below the trigger guard to install this. If you do not, you must first figure out if you have enough room for the ModWing to fit, and then you’ll have to drill a second holes. This is done by your discretion, and Phalanx Concealment is not responsible for your calculations of the holes and fitting of the ModWing. A picture with the dimensions of the ModWing is provided.
